Here’s a quick recap:.
Over time, it’s common for a belt to become stretched or broken, especially as vacuum belts are often made from rubber..When this happens, the brush roll will stop turning correctly.
This can happen instantly if the belt is broken, or get worse over time if the belt has been overstretched..The bad news is that the only way to fix this issue is to replace the drive belt.Fortunately, replacing a vacuum belt is a relatively straightforward process that can (usually) be performed at home.. We’ve already written a. complete guide to replacing a vacuum cleaner belt.
We recommend reading that article thoroughly before attempting this type of repair, but here’s a brief summary:.Start by noting your vacuum’s make and model, then use this information to find the right replacement belt.
Every vacuum needs a belt of the right tension and size – you can’t just use any belt.. Unplug and switch off the vacuum.
Then remove the base plate for full access to the brush..Capacities range from around 0.5 litres for cordless vacuums, up to 8 litres for large bagged cylinder vacuums.. A small capacity may not be an issue in a small home with light soiling.
But small canisters can quickly become a nightmare when cleaning big homes with lots of hair, dirt, and dust.If you have a large house with children and/or pets, look for a big vacuum cleaner that doesn’t need to be emptied as frequently..
As a general rule, cordless vacuums have the smallest capacities.Cylinder vacuums have the largest, with uprights somewhere in the middle.